Automotive Brake Data Scanner
For vehicles where electronic brake systems are fitted.
Works on the latest 2012/2014 models.
Compatible with global OBDII/EOBD vehicles.
Deactivates and re-activates brake control systems.
Retracts Calipers for brake pad replacement.
Initialises wear indicator when new pads are fitted.
Diagnoses EPB/SBC Caliper functionality.
TF memory card for data back-up.

Oil Service Diagnostic Kit
Resets Oil Inspection Light
Resets Oil Service Light
Sets Inspection 1 / 2 Service Interval
Supports all 10 OBDII test modes
Provides live data graphing
TF memory card for data back-up
Suitable for most modern vehicles

Automotive Stethoscope
For detecting unusual mechanical noises
Usually generated from the bearings / shafts or tappets

Electronic Stethoscope Kit
Detect and identify noisy components
Super sensitive microphone with cushioned headphones
4 Pick-up sensors with 4.8 metre long cord

3pc Mechanics Stethoscope
Super sensitive ear pieces and probe
Metal Probe extends to 350mm
Heavy duty flexible vinyl tubing
Locates trouble spots within the engine block

Analogue Multi-Meter
For measuring AC/DC voltage / current and Resistance
Operating temperature from 0C to 50C degrees

Digital Multimeter
0hms
AC/DC Amps
AC/DC Volts
Resistance and Diode Check

3 in 1 Tester for Batteries / Bulbs and Fuses
For AAA / AA / C / D and 9V batteries
Domestic and automotive fuses plus various bulbs.
Readings show up on a clear colour coded scale.
Powered by a 9V battery included.

Fuse Buddy Tester with LED light
Ideal for automotive electrical circuits.
Connects directly into the fuse socket.
Removed fuse is plugged into the Fuse Buddy
maintaining circuit protection.
Range : 0-20 Amps / 19.99V DC or AC

Automotive Circuit Fault Detector
Checking for Short Circuits
Locating Open Circuits
Battery Voltage Indicator
Range of measurement : 6 - 42V DC

Automotive Circuit Tester - 42V DC
with Flexible Probe.
For checking short and open circuits
Wire Tracing and Identification

92pc Measuring Cable and Probe Set
For checking all types of Automotive electrical circuits in conjunction
with other test equipment - multi-meters / oscilloscopes and simulators.
Includes : 2 Potentiometers | 2 LED Stroboscopes | 2 SRS Connectors
2 Alligator Clips | 4 Probes | 6 Connectors | 72 Test Leads

Automotive Multi-Tester Probe
For Circuit / Continuity / Polarity and Voltage Testing.
Checks Lamps and Electric Motors.
Checks Interior and Exterior Lights.
Checks Relays and Power Windows.
Tests the positive and negative voltage.
Polarity test for cables and sockets.

Circuit Tester
For General and Hybrid Vehicles
12 / 42 Volt Systems
Blue LED for 12 Volt
Red LED for 42 Volt
Safe for low current circuits
Tester only draws 3 milliamps

Automotive Voltage Tester
with 3-48 Volt DC range
Circuit Tester with 1M Lead
Plus Test Probe and Crocodile Clip
Pierce through clip for cable < 0.157in.
Cable length 39in. / 1000mm
Ideal for automotive circuit component fault finding.
With Negative and Positive Voltage LED indicators.

Digital LCD Circuit Tester 3 - 48 Volt Range
Computer Safe with backlit LCD display
Long Probe for use in confined spaces.
Sharp stainless steel probe for easy wire piercing.
Use to check electrical circuits on all 3 - 48 volt systems
Cable length : 11ft uncoiled
Voltage : DC 3 - 48V
Current Draw : 3 - 20V / 17mA | 20-48V /10mA
For positive and negative electrical charge.

Circuit Tester 6 - 12V
Automotive circuit tester with 900mm insulated cable and earth clip
Insulated contact point prevents accidental shorting
Check for presence of voltage quickly and easily

Circuit Tester
Power On
For 6 / 12 and 24 Volt Circuits
Insulated Ground Clip
Stainless Steel Probe
Heavy Duty 5ft Lead

Digital Clamp Meter with LCD Screen
Data Hold Function
Low Battery Indicator
Voltage - 2 to 1000V DC
Voltage - 200 / 750V AC
Current - 200 / 1000A AC
Resistance - 200 / 2k / 20k / 2M ohms
External Unit - 20M / 2000M ohms

3V Continuity Tester
1M Insulated Cable and Clip
Requires 1 AA Battery - Not included

Cordless Circuit Tester with Audible Buzzer
Ideal for ECM Sensors / Transducers / Airbags Etc
No Ground Wire or Clip Required
Detects 3 - 8 Volts
Light Sound and Vibration
V-Groove Guard for Safety

Multi-Function Audible Auto Tester
For 12 - 24 Volt Systems
Voltage Testing
Polarity Testing
Continuity Testing
Ignition Pulse Frequency
Peak Detection

Lambda Tester and Simulator
Tests Zirconia and Titania lambda sensors and ECU.
Suitable for 1 / 2 / 3 and 4 wire sensors - heated and unheated
LED display shows crossover signal from sensor.
Simulates rich or lean mixture signals to check ECU response
Insulation piercing clip for quick and easy connection.
Displays and confirms wire identity.
Low battery indicator / 9V battery supplied.

Engine Timing Light Gun
For checking and adjusting the ignition timing.
Suitable for all 12V petrol engines where it is possible to adjust the ignition timing.
Ignition signal via cable of first cylinder.
Bright stroboscopic light allows good readability of the ignition timing mark.
Features include xenon bulb and inductive pick-up.
Impact resistant housing with on / off trigger

Timing Light with Digital Display
Voltage : 12V / 10W.
Stroke select function.
Test rotation speed and advance angle.
Max Test Angle : 90 degrees
Precision : 0.1 degrees

AC / DV Voltage Tester
Range - 12V DC - 230V AC
Digital LCD Display

AC / DV Voltage Tester
Range - 12V DC - 230V AC
Digital LCD Display with Back Light