Universal Clutch Alignment Tool
For single plate clutches.
Suitable for flywheels with or without pilot bearing.
Fast to fit and remove with universal applications.
Collet Sizes : 14mm to 28mm across 3 adaptors.
Cone size range : 35mm - 67mm.

Jaguar / Land Rover Clutch Alignment Tool
To hold the clutch centre plate centred on the
flywheel while fitting the clutch cover plate.
Applicable to Ford Duratorq Diesel Engines

17pc Universal Clutch Aligning Kit
For alignment of flywheel pilot hole and clutch drive plate
Precision manufactured steel bushes with chemically blacked finish
Suitable for most cars and light commercial vehicles

10pc Clutch Alignment Tool Set
Complete with 8 adaptors
Cone : 20.5 x 82mm long
Sizes : 11 | 12 | 15 | 17 | 19 | 20 | 21 | 25 mm.
Tapered cone aids clutch plate alignment
For Aligning single disc clutches on most vehicles.

11pc Clutch Alignment and Adjustment Tool Set
Suitable for a wide range of vehicles and some light commercial vehicles.
Screw action provides fast adjustment for required hub diameter.
8 interchangeable spigot adaptors aid close alignment.
Adaptors : 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20mm diameter.
Expanding mandrels : 15 - 19mm | 20 - 26.6mm | 23 - 36mm diameter.

Audi Clutch Alignment Tool
For alignment and installation on the workbench.
Suitable for front wheel drive vehicles
without pilot bearing in the flywheel.
3 different size expanding collets.
Small cone - 15mm
Medium cone - 19mm
Large cone - 24mm

Clutch Alignment Tool Kit
For clutch discs with 15 to 28 mm clutch hubs.
Provides accurate centring of the clutch disc
on most vehicles with or without pilot bearing.
Alignment according to friction surface of the clutch pressure plate.
Centring sleeve diameter : 12 | 14 | 15 | 16 | 17 | 18 | 19mm

Release Shaft / Guide Rail Bolt Puller
For extracting the clutch release shaft on the Fiat Ducato with pulling clutch.
Required for clutch replacement and gearbox repair on 1994 models.
Includes puller body with M8 x 1.25 internal spindle thread pull clamp.
Also for extracting the chain guide rail bolt on BMW and Mercedes engines.
M6 x 1.0 bolt for removing the guide rail bolt

Dual Clutch Transmission Tool
For 6 speed DCT - Dual Clutch Transmission
Applicable to : Ford focus | C-Max | S-Max | Galaxy | Mondeo | Kuga
Volvo C30 | C70 / 06 | S40 / 04 | S60 / 11 | S80 / 07 | S80L |
V40 /13 | V40 Cross Country | V50 | V60 | V70 / 08 | XC60
Also Dodge Avenger and Journey plus Chrysler Sebring.

Twin-Clutch Dry Transmission Remover / Installer
For servicing the transmission and alignment of the twin clutch when changing the oil seal.
Applicable to : Ford and Volvo transmission DPS6.
OEM number : 307675

Audi / VW 7 Speed DSG Clutch Installer / Remover
For the installation and Removal of the Clutch or Gearbox
Applicable to Audi / VW 7 speed vehicles similar to
conventional single disc clutches the dry double clutch
is also located in the gearbox housing

DSG Clutch Bearing Gauge Block Tool
For checking and adjusting the position of clutch bearings
in automatic 7 speed / DSG gearboxes with dual clutch.
Applicable to Volkswagen / Audi vehicles from 2011 onwards.
Suitable for use with CT0500 VAG DSG Clutch Installation Kit
OEM : T10466

For Removing the DSG Gearbox ECU / mechatronic control module
Audi / VW 7-speed
Specially designed to remove load from plungers of the mechatronic unit
when you insert the tool between clutch lever and gear housing.
Applicable to : Audi / VW 7-speed dual clutch gearbox. Ideal for use in conjunction with CT0500

SAC Clutch Alignment Tool Set
For pre-tensioning self adjusting clutches before removal or installation.
Features a refitting tool to allow the clutch adjuster to be wound back.
Includes a selection of clutch plate and spigot alignment adaptors.
Clutch plate adaptors : 17 - 33.9mm
Spigot adaptors : 13.9 - 21.9mm.
Assembly flywheel threads

SAC Clutch Tool Set
For assembling and fitting Self Adjusting Clutches
on Audi / BMW / Fiat / Mercedes / Renault / Vauxhall / Opel and Volvo.
Avoids clutch plate distortion due to incorrect fitting
and subsequent vibration and shortening of clutch life.

Automatic Transmission Clutch Spring Compressor
Adjustable tool for removing or installing the snap ring
on a transmission rear clutch Piston.
It applies pressure to the clutch drum retaining washer
to compress Piston return springs.
For use on most American cars and light trucks.

Automatic Transmission Clutch Spring Compressor
4 Leg Capacity : 64mm to 175 mm Diameter.
For replacement of rear transmission clutch Piston snap ring.
Adjustable legs fit most cars and trucks.

Flywheel Puller - M26 x 1.5 RH Thread Male
Required to service the flywheel on a large number of Motorbikes
including: Honda / Yamaha / Kawasaki and Suzuki 2 / 4 Stroke Engines

10pc Motorcycle Flywheel Puller Set
used to separate flywheel from the crankshaft taper.
Suitable for most makes of motorcycle.
Left and Right hand thread

BMW Flywheel Tool Set
For Diesel and Petrol chain drive engines.
Found on most BMW K | M | N models
The tool can also be used to hold the flywheel when
removing the timing chain for cylinder head work.

Flywheel Locking Tool
For locking the flywheel via the starter motor aperture.
on Hyundai and Kia vehicles with petrol engines from 2007 to 2018.

Gear Puller - 3 Jaw
8in. / 200mm
Reversable Legs

5 Ton Gear Puller
with Ratchet Action Legs
for One Man Operation
Capacity : 5in.- 8in. / 125 - 200mm

5 Ton Gear Puller Set
2 and 3 Way Short and Long Legs
Legs now with Ratchet Action
Short Legs : 4in.- 5in. / 100 - 125mm
Long Legs : 5in. - 8in. / 125 - 200mm
Chrome molybdenum -
Legs and Forcing Screw.

6 Way Multi-Purpose Hydraulic Gear Puller
2 and 3 Leg Configuration
Up to 10 Ton Capacity

Gear Puller Set
with 2 and 3 Leg variations
Legs 3 | 4 | 6 | 8in. Long
Legs 75 | 100 | 150 | 200mm

Universal Puller Set
2 Leg / 3 Sizes
Variable Width
Chrome Molybdenum
Legs - 100 / 200 / 250mm Long

Puller Set - Universal 3 Arm
Puller set with different Leg Lengths for confined spaces
2 Leg Sliding Bar
3 Leg Sliding Bar
Arms - 100 / 200 / 250mm x 3
Spindles - 160 / 270mm Long.